Posted inreservoir engg
VOLUMETRIC GAS RESERVOIR ENGINEERING
Volumetric gas reservoir engineering is introduced at this early stage in the book because of…
Posted inreservoir engg
OIL RECOVERY: RECOVERY FACTOR
Equation (1.2), for the STOIIP, can be converted into an equation for calculating the ultimate…
Posted inreservoir engg
FLUID PRESSURE REGIMES
The total pressure at any depth, resulting from the combined weight of the formation rock…
Posted inreservoir engg
BASIC CONCEPTS IN RESERVOIR ENGINEERING
In the process of illustrating the primary functions of a reservoir engineer, namely, the estimation…
Posted inpetroleum production
Formation damage
Producing formation damage has been defined as the impairment of the unseen by the inevitable,…
Posted inpetroleum production
Formation damage from paraffins and asphaltenes
Perhaps the most common formation damage problem reported in the mature oil-producing regions of the…
Posted inpetroleum production
Scale problems in production
Wells producing water are likely to develop deposits of inorganic scales. Scales can and do…
Posted inpetroleum production
Nodal analysis
Systems analysis has been used for many years to analyze the performance of systems composed…
Posted inpetroleum production
Flow through chokes
A wellhead choke controls the surface pressure and production rate from a well. Chokes usually…
Posted inpetroleum production
Tubing Selection, Design, and Installation
IntroductionTubing is the normal flow conduit used to transport produced fluids to the surface or…