Posted inFeatured
Posted inpetroleum equipment design
Absorption and Stripping
In absorption (also called gas absorption, gas scrubbing, or gas washing), there is a transfer…
Posted inpetroleum equipment design
Filtration Process in the Petroleum Industry
Be it any industry, the process of filtration is an essential prerequisite. The same goes…
Posted inpetroleum equipment design
THICKENERS
Thickening is a process where a slurry or solid-liquid mixture is separated to a dense…
Posted inpetroleum equipment design
Design and Optimization of Separators
Once oil and gas are brought to the surface, our main goal becomes that of…
Posted inpetroleum equipment design
Heat-Balance Calculations
If you have read this far, and understood what you have read, you will readily…
Posted inpetroleum equipment design
Kettle Type Reboiler
Kettle reboilers are commonly applied when a wide range of process operations (high turndown capability),…
Posted inpetroleum equipment design
Types of Reboilers
Reboilers are classified according to their orientation and the type of circulation employed. The most…
Posted inpetroleum equipment design
Reboiler Theory
The transfer of heat to and from process fluids is an essential part of most…
Posted inpetroleum equipment design
Equipment Design in Advantages and Disadvantages
Advantages · Lower condensing pressures than air cooled condensers. · Better control over condensing pressure. · Since water…
Posted inpetroleum equipment design
Equipment Design
The water cooled chillers shown below use an evaporator to remove heat from the process…